Precautions for installation of ship crane

When installing the ship crane, it is necessary to confirm that the column is installed vertically and check the degree of verticality from different directions

When installing the ship crane, the ground must be flat and free of debris. If the floor is paved with tiles, a suitable layer of padding must be added to increase friction with the ground

3. When installing the ship crane, the nut that fixes the screw cylinder must be tightened. The commonly used hook wrench generally cannot achieve the required force. It is recommended to extend a round tube in front of the hook wrench and regularly check whether the nut is loose during lifting

4. When installing the ship crane, the installation position of the rotating arm on the column should not be too high or too low. Both too high and too low positions can reduce the load-bearing capacity of the column and cause it to collapse Therefore, the nozzle of the high-pressure cleaner is designed to be movable and can rotate in form to achieve better combat effectiveness. The nozzle spraying distance can be easily adjusted in the basic cycle, and the nozzle angle of the incident angle can be adjusted at the same time to improve the cleaning effect of aluminum strips. In the general spray direction, the surface of the strip is cleaned and enters 75.83. The best effect is achieved.